BKMVT - PLY-TILE 700-GLOSS & SEMI GLOSS (SEE SUPP D

  • MSDS: BKMVT
  • Manufacturer: M A BRUDER AND SONS INC
  • Product Name: PLY-TILE 700-GLOSS & SEMI GLOSS (SEE SUPP D
  • National Stock Number: 8010-00N016154
Product Identification

Product ID:PLY-TILE 700-GLOSS & SEMI GLOSS (SEE SUPP D
MSDS Date:04/22/1988
FSC:8010
NIIN:00N016154
MSDS Number: BKMVT

Responsible Party
M A BRUDER & SONS INC
600 REED ROAD
BROOMALL, PA 19008
US

Emergency Phone: 215-353-5100; 215-853-2051

Info Phone: 215-353-5100

Cage: 85519

Contractor
M A BRUDER & SONS INC
600 BROOMALL, PA 19008 US

Telephone: 610-353-5100;610-359-3635

Cage: 85519

Ingredients

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 14-42%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


SILICONE DIOXIDE

CAS: 68855-54-9

Fraction By Weight: >18%

OSHA PEL 0.08 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 TDUST (MFR)


SILICA, CRYSTALLINE-QUARTZ (SILICONE DIOXIDE)

CAS: 14808-60-7

Fraction By Weight: >17%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 5-16%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293


PROPYLENE GLYCOL MONOMETHYL ETHER

CAS: 107-98-2

RTECS: UB7700000

Fraction By Weight: 1-3%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192


1-METHOXY, 2-PROPANOL ACETATE (PROPYLENE GLYCOL MONOMETHYL

CAS: 108-65-6

RTECS: AI8295000

Fraction By Weight: 3-8%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


EPOXY MODIFIED ESTER RESIN


TINTING COLORS


TO SOLV/CHEM FUMES. RAGS WASTE CONTAINING OIL

RTECS: 9999999ZZ


INTERFACES WILL OXIDIZE/MAY IGNITE SPONT/SHOULD BE

RTECS: 9999999ZZ

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:CAN CAUSE ANESTH RXN. POSS
ACUTE NERVS SYS DEPRESS/IRRIT OF RESP TRACT CHARACT BY
HDCH/DIZZ/STAG GAIT/CONFUSN/UNCON/COMA. NOTE:INTENTIONAL MISUSE BY
DELIB CONC/INHALG CONTENTS MAY BE HARMF UL/FATAL. RPTS HAVE ASSOC
RPTD/PRLNGD OCCUPATIONAL OVEREXP TO SOLV W/PERM BRAIN/NERVS SYS
DAM. (SEE EFTS OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:SKIN/EYE:SLIGHT TRANSIENT EYE IRRIT.
ALLERGIC SKIN RXN IN SUSCEPTIBLE INDIV. RPTD EXPOS MAY CAUSE SKIN
IRRIT. PRLNGD EXPOS MAY NOT CAUSE SIGNIFICANT SKIN IRRIT.
CHRONIC:INHAL/SKIN/EYE: SKIN S ENSIT MAY RESULT FROM RPTD EXPOS.
THE EFTS OF EXCESSIVE CHRONIC EXPOS HAVEN'T BEEN FULLY
INVESTIGATED. (SEE SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE FROM EXPOS. RESTORE BRTHG. KEEP WARM/QUIET.
CALL MD. EYES: FLUSH IMMED W/LGE AMTS OF WATER FOR AT LEAST 15
MINS. CONSULT AN MD FOR SPEC MED TREATMENT. SKIN: WASH AFFECTED
AREA W/SOAP & W ATER. REMOVE CONTAMD CLTHG. CONSULT AN MD. INGEST:
CALL MD IMMED (FP N.)

Fire Fighting

Flash Point Method:SCC
Flash Point:115F,46C
Lower Limits:SEE INGRED
Upper Limits:SEE INGRED
Extinguishing Media:THE NFPA CLASSIFIES BURNING LIQS CLASS B FIRES. ANY
APPRVD CLASS B FIRE EXTING/AGENT MAY BE USE. CO*2, DRY CHEM & FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA/FULL PROT EQUIP .
H2*O SPRAY MAY BE INEFT. IF H2*O, FOG NOZZ ARE RECOM. H2*O TO COOL
CLSD CONTR TO PVNT PRESSURE (SEE SUPP DATA
Unusual Fire/Explosion Hazard:COMBUST. KEEP CONTR CLSD TIGHTLY. ISOLATE
FROM HEAT/FLAME. CLSD CONTR MAY EXPLO WHEN EXPOS TO EXTREME HEAT.
APPLI TO HOT SURFS REQUIRES SPEC (SEE SUPP DATA)

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAME & HOT
SURF). VENTILATE AREA & AVOID BREATHING VAPORS. CONTAIN & REMOVE
W/INERT ABSORBENT MATERIAL USING NON-SPARKING TOOLS
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DONT STORE IN SUN OR ABOVE 120 F. OSHA
STOR CATEGORY:STORE LGE QUANTITIES IN BUILDING DESIGNED FOR STOR OF
FLAMMABLE/COMBUSTIBLE LIQUIDS.
Other Precautions:DONT TAKE INTERNALLY. DONT WELD/FLAME CUT W/OUT
PROPER VENT TO INSURE THE AREA IS FREE OF FLAMM VAPS. DONT
CUT/PUNCTURE/WELD ON/NEAR THE CONTR. ENTRANCE INTO CLSD STOR
TANKS:USE NIOSH/MSHA APPROP RESP /AIR LINE FOR POSS EXPOS (SEE
INGRED 9)

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED CHEMICAL MECHANICAL FILTER
RESPIRATOR DESIGNED TO REMOVE A COMBINATION OF PARTICULATE &
VAPORS. (NIOSH/MSHA TO 23C OR EQUIVALENT)
Ventilation:ALL APPLICATION AREAS SHOULD BE VENTD IN ACCORDANCE W/OSHA
REGULATION 29 CFR 1910 DURING USE/UNTIL AREA IS FREE OF VAPS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY EYEWEAR W/SPLASH GUARDS FOR
BRUSH/ROLLER APPLICATN. PROT SKIN CREAM. CLEAN UNCONTAMD CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFRS PART NO/TRADE NAME:COATING PART A,190193. FIRE FIGHT
PROC:BUILD-UP/POSS AUTO IGNIT/EXPLO WHEN EXPO TO EXTREME HEAT.
EXPLO HAZ:PREC DURING EMER CNDTN/OVEREXPO TO DECOMP PROD MAY CAUSE
HLTH HAZ. SY MPS MAY NOT BE IMMED APPARENT. OBTAIN MED ATTN. EFTS
OF OVEREXP:RPTD HNDLG/USE MAY PRESENT ADDN HAZ. EXCERCISE DUE CARE.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:243F,117C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER/ETHYL ETHER
Percent Volatiles by Volume:23-33

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS OR BASES & SELECTED AMINES.
CONSIDERABLE HEAT MAY BE RELS UPON RXN W/MATLS.
Stability Condition to Avoid:HIGH TEMPERATURE & FLAME.
Hazardous Decomposition Products:IF INVOLVED IN FIRE (FROM OTHER
SOURCES), COULD CONCEIVABLY RESULT IN RELS OF CO*2, CO, ALDEHYDES &
ACIDS.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL, STATE AND FEDERAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.